Junying – a professional die casting manufacturer who is dedicated in precision aluminum zinc alloy die casting for many years.
Just send you inquiry to begin our permanent glad cooperation story.

Categories
Contact Us

Tel:    +86 769 82890830

Fax:    +86 769 81153273

Phone:   +86 15964037999

Skype:   diecasting-mould

 sales@diecasting-mould.com




 

Introdution of Two Basic Types Of Die Casting Machines

Source: Junying   Author: Junying   Posted: 2013-12-19 11:38:30   Hits: 583
There are two basic types of die casting machines: hot-chamber machines and cold-chamber machines.These are rated by how much clamping force they can apply. Typical ratings are between 400 and 4,000 st (2,500 and 25,400 kg).
Hot-chamber machines

Hot-chamber machines, also known as gooseneck machines, rely upon a pool of molten metal to feed the die. At the beginning of the cycle the piston of the machine is retracted, which allows the molten metal to fill the "gooseneck". The pneumatic or hydraulic powered piston then forces this metal out of the gooseneck into the die. The advantages of this system include fast cycle times (approximately 15 cycles a minute) and the convenience of melting the metal in the casting machine. The disadvantages of this system are that high-melting point metals cannot be utilized and aluminium cannot be used because it picks up some of the iron while in the molten pool. Due to this, hot-chamber machines are primarily used with zinc, tin, and lead based alloys.

Cold-chamber machines

These are used when the casting alloy cannot be used in hot-chamber machines; these include aluminium, zinc alloys with a large composition of aluminium, magnesium and copper. The process for these machines start with melting the metal in a separate furnace. Then a precise amount of molten metal is transported to the cold-chamber machine where it is fed into an unheated shot chamber (or injection cylinder). This shot is then driven into the die by a hydraulic or mechanical piston. This biggest disadvantage of this system is the slower cycle time due to the need to transfer the molten metal from the furnace to the cold-chamber machine.